Certificate III in Heavy Commercial Vehicle Mechanical Technology (CRICOS course code 103605C) is a Certificate III delivered by GLOBAL TRAINING INNOVATIONS PTY. LTD. over 1 year 9 months (~90 weeks). This qualification prepares international students for careers in servicing, repairing, and diagnosing heavy commercial vehicles, including trucks, buses, and trailers. As a CRICOS-registered course, it meets Australian education and quality standards under the ESOS Act. Students gain hands-on experience in mechanical and electrical systems, using industry-standard diagnostic tools. With campuses in Brisbane, Gold Coast, and Sydney, the course offers flexibility for students across key Australian study destinations. All information on this page is sourced from the official CRICOS register (April 2026) and is subject to change—always confirm with the provider.
| Metric | Value |
|---|
Certificate III in Heavy Commercial Vehicle Mechanical Technology (CRICOS course code 103605C) is a Certificate III delivered by GLOBAL TRAINING INNOVATIONS PTY. LTD. over 1 year 9 months (~90 weeks). This course is classified under Field of Education 03 - Engineering and Related Technologies, specifically Automotive Engineering and Technology (030599). It equips students with the skills to perform complex repairs and maintenance on heavy vehicles, covering areas such as engine systems, transmission, driveline, steering, suspension, and electrical systems. Graduates may pursue roles as heavy vehicle mechanics, diagnostic technicians, or workshop supervisors. GLOBAL TRAINING INNOVATIONS PTY. LTD., trading as Octa College (www.oct.edu.au), is a private CRICOS-registered provider (03413K) offering this qualification in multiple Australian cities. The course is full-time, with English as the language of instruction, and no mandatory work component.
The Certificate III in Heavy Commercial Vehicle Mechanical Technology prepares students to work with heavy-duty vehicles used in transport, mining, construction, and agriculture. Study areas include: diagnosing and repairing mechanical and electrical faults in heavy vehicles; servicing and replacing engine, transmission, braking, suspension, and steering components; checking and adjusting wheel alignment and tyre pressures; testing and repairing hydraulic, pneumatic, and cooling systems; using diagnostic scanners and workshop manuals; applying workplace health and safety procedures. Graduates develop both practical skills and theoretical knowledge aligned with the national training package AUR31120. This level (AQF Level 3) typically requires completion of Year 10 or equivalent and demonstrates competence in skilled tasks with some complexity.
The course runs for 1 year 9 months (~90 weeks) full-time. It is a single qualification (no dual or combined awards) and is taught entirely in English. The CRICOS register lists a duration of 90 weeks, which includes tuition and supervised study hours. Students are expected to attend classes at the campus and may also have access to workshops for practical training. The full-time study mode is designed to meet student visa requirements. No foundation studies component is included. For specific study timetables and mode of delivery (e.g., face-to-face, online, blended), contact GLOBAL TRAINING INNOVATIONS PTY. LTD. directly.
The indicative fees for this course as of April 2026 are: tuition fee A$22,500, non-tuition fee A$0, estimated total A$22,500. Please note these fees are indicative only and sourced from the CRICOS register—they are set by the institution and subject to change. This amount does not include Overseas Student Health Cover (OSHC), which is mandatory for student visa holders (typically A$500–A$700 per year for single cover), personal living costs (e.g., rent, food, transport), or the visa application charge (currently A$1,600 for Subclass 500). Always visit www.oct.edu.au or contact GLOBAL TRAINING INNOVATIONS for the most current fee schedule and payment options.
For international students, typical entry requirements include: English language proficiency of IELTS 5.0 to 5.5 overall (or equivalent); completion of Australian Year 10 or equivalent overseas qualification; and being at least 18 years of age at course commencement. Specific academic prerequisites may apply—contact the provider for full details. Foundation or pathway options are not shown on the CRICOS register for this course; if you need to improve your English or academic standing, inquire with GLOBAL TRAINING INNOVATIONS about available preparation programs. All applicants must meet the Genuine Temporary Entrant (GTE) requirement as part of their student visa application.
No work component. This course does not include a mandatory work placement or internship. However, as a student visa holder, you can work up to 48 hours per fortnight during study periods and unlimited hours during scheduled course breaks, subject to visa conditions. Practical training is delivered through on-campus workshops and simulated work environments.
The course is delivered at three campuses: Brisbane Campus & Workshop in ARCHERFIELD, QLD; Gold Coast Campus in SOUTHPORT, QLD; and Sydney Campus (Parramatta) at Level 6, 16-18 Wentworth Street, Parramatta, NSW. Brisbane is Queensland's capital with a large international student community—over 100,000 students, with approximately 60 CRICOS-registered providers. Gold Coast is popular for its lifestyle and has around 50 providers. Parramatta in Sydney is a major transport hub with easy access by train and bus. Typical living costs vary: weekly rent can range from A$200–$350 for shared accommodation in these cities. For detailed campus facilities and transport links, visit the provider's website.
To study this course as an international student, you need a Student visa (Subclass 500). Key requirements: a valid Confirmation of Enrolment (CoE) from GLOBAL TRAINING INNOVATIONS PTY. LTD., evidence of English proficiency, genuine access to funds to cover tuition and living costs (A$21,041 per year plus travel), Overseas Student Health Cover (OSHC), and satisfying the GTE requirement. Student visa holders can work up to 48 hours per fortnight during term and unlimited hours during scheduled breaks. All applications are assessed by the Department of Home Affairs. HeadStart Academy recommends consulting a registered migration agent (MARA) or the Department for personalised advice.
Follow these three steps to enrol in Certificate III in Heavy Commercial Vehicle Mechanical Technology at GLOBAL TRAINING INNOVATIONS PTY. LTD.:
1. Research CRICOS-registered providers: Confirm that GLOBAL TRAINING INNOVATIONS PTY. LTD. (CRICOS 03413K) is registered to deliver this course. You can verify on the official CRICOS website or through HeadStart Academy's provider page.
2. Apply directly to your chosen institution: Submit your application to GLOBAL TRAINING INNOVATIONS PTY. LTD. meeting the entry requirements (academic qualifications, English test scores). Check application deadlines and provide all required documents (transcripts, passport copy, evidence of English proficiency).
3. Receive your Confirmation of Enrolment (CoE) and apply for your Student visa (Subclass 500): Once accepted, the provider will issue your CoE. Use this to lodge your visa application with the Department of Home Affairs, paying the visa application charge and arranging OSHC. After visa grant, you can begin your studies.
Ready to start? Check the entry requirements and apply directly to GLOBAL TRAINING INNOVATIONS PTY. LTD. today.
View the full GLOBAL TRAINING INNOVATIONS PTY. LTD. profile →
Certificate III in Heavy Commercial Vehicle Mechanical Technology is a CRICOS-registered programme at GLOBAL TRAINING INNOVATIONS PTY. LTD.. Use this register extract [CRICOS register, Apr 2026] to cross-check codes, duration and indicative fees before you apply.
This page is general information only and not migration advice. Confirm Student visa (Subclass 500) requirements with the Department of Home Affairs.