Certificate III in Carpentry (CRICOS course code 110130H) is a Certificate III delivered by Valley International Pty Ltd over 2 years. This course, registered under CRICOS provider code 03989C, sits within the Architecture and Building field (040311 - Carpentry and Joinery) at AQF Level 3. It prepares international students for entry-level carpentry roles in Australia's construction industry. The programme covers core carpentry skills, workplace safety, and use of hand and power tools. As a CRICOS-registered course, it meets Australian Government standards for international student enrolment (ESOS Act protections apply). Valley International Pty Ltd is a private provider with delivery locations in Adelaide, Spring Hill (Brisbane), and Southport (Gold Coast). Indicative annual cost: $26,000 total. HeadStart Academy presents this information as a free resource, sourced from the official CRICOS register as at April 2026. Use this page to compare courses, understand visa requirements, and take the next step toward studying carpentry in Australia.
Certificate III in Carpentry (CRICOS course code 110130H) is a Certificate III (AQF Level 3) qualification delivered by Valley International Pty Ltd (CRICOS 03989C), a private educational provider. The course falls under the field of Architecture and Building, specifically Carpentry and Joinery (040311). It is designed for international students seeking foundational skills in the carpentry trade. The programme duration is 2 years (104 weeks), with English as the language of instruction. This is a single qualification with no dual or foundation study options. The course does not include a mandatory work component. The nationality of students enrolled is diverse, reflecting Australia's multicultural education environment. All data is sourced from the official CRICOS register (April 2026). Australia has over 1,500 CRICOS-registered providers offering more than 26,000 courses. This course is one of many within the building and construction sector, which is in high demand across skill shortage lists. Students are protected by the ESOS Act, ensuring quality education and consumer rights.
As a Certificate III in Carpentry student, you will learn essential carpentry skills aligned with Australian industry standards. The curriculum typically covers: workplace health and safety (WHS), reading and interpreting plans and specifications, using carpentry tools and equipment, erecting and dismantling formwork for concrete, constructing and installing timber structures (e.g., framing, roofing, flooring), and applying finishing techniques. Graduates at this level are prepared for roles such as carpenter, joiner, or formworker. The field of Carpentry and Joinery (040311) encompasses all aspects of wood construction and finishing. While specific unit descriptions are not provided here, the AQF Level 3 indicates that graduates will have a broad range of skilled applications, including routine and non-routine tasks, and some responsibility for others' output. Practical training is a core component, with workshops and simulated site environments. Note: the provider may offer additional learning resources. Always confirm exact syllabus with Valley International Pty Ltd.
This Certificate III in Carpentry has a duration of 2 years (104 weeks) as recorded on the CRICOS register. The course is delivered full-time in English. There is no online or part-time option listed. The study mode is likely face-to-face classroom and workshop-based, given the trade nature of the qualification. It is a single qualification — no dual or combined awards are offered. No foundation studies pathway is included; however, the provider may offer English language support or bridging programs. The 104-week period allows for comprehensive skill development across multiple carpentry units. Students are expected to maintain full-time enrolment to comply with student visa conditions. This duration is standard for Certificate III trade courses in Australia. Check with Valley International for their specific academic calendar, including term dates and holidays.
The indicative fees for Certificate III in Carpentry at Valley International Pty Ltd are as follows: tuition fee A$24,000, non-tuition fees A$2,000, estimated total A$26,000. These figures are sourced from the CRICOS register as at April 2026 and are subject to change. The tuition fee covers the cost of teaching and assessment materials, while non-tuition fees may include application charges, resource fees, and student services. Please note: Overseas Student Health Cover (OSHC), living costs, and the visa application charge are NOT included in this estimate. For current accurate fees, visit the official Valley International website or contact their admissions office. OSHC is mandatory for international students on a Student visa (Subclass 500) — expect an additional cost of approximately A$500–A$700 per year depending on the provider. Living costs vary by city: Adelaide averages A$300–A$400 per week for rent, Brisbane around A$350–A$450, and Gold Coast A$350–A$500. Budget accordingly. The visa application charge (Subclass 500) is currently A$1,600 (subject to change). Always verify total costs with the Department of Home Affairs and the provider.
General entry requirements for Certificate III in Carpentry at Valley International Pty Ltd include English language proficiency equivalent to IELTS 5.0-5.5 overall. Alternative tests such as TOEFL or PTE may be accepted. Applicants typically need to have completed Year 11 or equivalent (Australian standard) or a Certificate II level qualification. Prior study in a related field (e.g., building or construction) may be beneficial but is not always required. The provider may also require a minimum age of 18. For international students, meeting the Genuine Temporary Entrant (GTE) criterion is essential. Specific academic prerequisites are set by Valley International — contact them directly for details. If you do not meet the English or academic requirements, pathway options such as foundation programs or English language courses may be available at the same provider or other institutions. Always confirm with the provider before applying. HeadStart Academy does not determine entry requirements — use this as a guide only.
This course does not include a mandatory work component. It is purely academic, with no structured internship, placement, or work experience module. However, student visa holders (Subclass 500) are permitted to work up to 48 hours per fortnight during term time and unlimited hours during scheduled breaks. This work is not part of the course but can help gain local experience. If you are looking for a carpentry course that offers work-integrated learning, check other CRICOS-registered options. For this course, all learning occurs in classroom and workshop settings. The ESOS Act ensures that if a work component were included, it would be clearly stated. Since it is not, you can focus fully on studies. Work rights are subject to visa conditions — refer to the Department of Home Affairs.
Certificate III in Carpentry is delivered at three locations: VIC Adelaide — ADELAIDE, SA; VIC Brisbane Campus - Ground Floor 433 Boundary St SPRING HILL QLD 4000 — Spring Hill, QLD; and VIC Gold Coast — SOUTHPORT, QLD. Note: The 'VIC' prefix is part of the provider's internal naming. Each campus is in a major Australian city with active construction sectors. Adelaide, South Australia's capital, has a population of ~1.3 million, lower living costs than Sydney/Melbourne, and good public transport. Spring Hill is a suburb near Brisbane's CBD (population ~2.5 million), with easy bus and train access. Southport is the central business district of the Gold Coast (~700,000), a growing city with many building projects. These locations offer diverse settings — from Adelaide's laid-back lifestyle to Brisbane's urban energy and Gold Coast's coastal environment. Each campus likely features workshop facilities. Choosing a location depends on your preference for climate, cost of living, and industry connections. Adelaide has about 50+ CRICOS-registered providers; Brisbane has 150+; Gold Coast has 40+. All campuses comply with ESOS standards.
To study Certificate III in Carpentry as an international student in Australia, you need a Student visa (Subclass 500). This visa allows you to stay in Australia for the duration of your course plus a period after (typically up to 2 months). Key conditions: maintain enrolment in a CRICOS-registered course, meet attendance and academic progress requirements, hold adequate OSHC, and satisfy the Genuine Temporary Entrant (GTE) criterion. Work rights: 48 hours per fortnight during term, unlimited during scheduled holidays. Family members can accompany you (with work restrictions). Course costs and OSHC must be paid in advance. Financial capacity evidence is required (e.g., bank statements, sponsorship). The visa application charge is currently A$1,600. Processing times vary. It is strongly recommended to consult a registered migration agent (MARA) or the Department of Home Affairs for personalised advice. HeadStart Academy is not a migration agent. For detailed visa information, visit the official Home Affairs website.
Follow these three steps to apply for the Certificate III in Carpentry at Valley International Pty Ltd: 1. **Research CRICOS-registered providers** — Use HeadStart Academy to compare carpentry courses across Australia. Ensure the provider is CRICOS-registered (Valley International is CRICOS 03989C) to be eligible for a Student visa. 2. **Apply directly to your chosen institution** — Contact Valley International for the application form. Prepare required documents: academic transcripts, English test results (e.g., IELTS 5.0-5.5), passport copy, and evidence of financial capacity. Check application deadlines (intakes are typically in February and July). 3. **Receive your Confirmation of Enrolment (CoE) and apply for your Student visa** — Upon acceptance, Valley International will issue a CoE. Use this to apply for a Student visa (Subclass 500) online through the Department of Home Affairs. Submit all supporting documents, pay the visa fee, and undergo health checks if required. Once granted, you can travel to Australia and commence your studies. Need help? HeadStart Academy provides free guidance but does not handle applications. Contact a registered education agent for support.
Before enrolling in a Certificate III in Carpentry, consider the following: First, check if the course is on the Skilled Occupation List (SOL) or state nomination lists — carpentry is often in demand, which may help post-study migration pathways. Second, verify the provider's reputation and facilities. Valley International is a private provider; read student reviews and check if they have industry connections. Third, think about location: Adelaide offers lower living costs but fewer large-scale construction projects than Brisbane or Gold Coast. Fourth, understand the licensing requirements for carpenters in Australia — after completing the Certificate III, you may need additional experience for a tradesperson's licence. Fifth, budget for tools and safety equipment (often not included in fees). Sixth, prepare for the physical demands of the trade. Finally, consider the availability of part-time work in the construction sector — student visa holders can work 48 hours per fortnight, and the building industry often hires casual labour. Research the job market in your chosen city. HeadStart Academy's state pages (e.g., /states/sa) offer more location-specific insights.
Ready to apply? Use our How to Apply section above to get started.
Certificate III in Carpentry is a CRICOS-registered programme at Valley International Pty Ltd. Use this register extract [CRICOS register, Apr 2026] to cross-check codes, duration and indicative fees before you apply.
This page is general information only and not migration advice. Confirm Student visa (Subclass 500) requirements with the Department of Home Affairs.