Certificate III in Cabinet Making and Timber Technology (CRICOS course code 119864H) is a Certificate III delivered by Saveedu Pty Ltd over 1 year. This qualification prepares students for roles in cabinet making, furniture production, and timber technology within Australia's manufacturing industry. As a CRICOS-registered course, it meets the standards required for international student enrolment under the ESOS Act. Located in New South Wales, the course offers hands-on training at two campuses in Punchbowl and Seven Hills. Whether you aim to become a skilled cabinet maker or pursue further study, this qualification provides a solid foundation in engineering and related technologies.
| Metric | Value |
|---|
Certificate III in Cabinet Making and Timber Technology (CRICOS course code 119864H) is a Certificate III (AQF Level 3) qualification in the field of Manufacturing Engineering and Technology, specifically Cabinet Making (Field of Education code 030113). Delivered by Saveedu Pty Ltd (CRICOS provider 04423M), this 52-week program is taught entirely in English and leads to a single qualification with no dual or foundation study components. The course is registered under the VET national code MSF30322. As with all CRICOS-registered courses, international students are protected by the ESOS Act, ensuring quality education and consumer rights. Saveedu Pty Ltd is a private provider with campuses in Punchbowl and Seven Hills, NSW.
This course falls under the Engineering and Related Technologies field, focusing on Manufacturing Engineering and Technology. At Certificate III level, students typically learn practical skills in cabinet making, including timber technology, joinery, finishing, and installation. Graduates gain competencies to work in the cabinet making and furniture production industry, with knowledge of materials, tools, and safety procedures. The curriculum aligns with industry standards and prepares students for roles such as cabinet maker, furniture finisher, or shopfitter. While specific unit details should be confirmed with the provider, this qualification covers both theoretical and practical aspects of timber technology and manufacturing processes.
According to the CRICOS register, Certificate III in Cabinet Making and Timber Technology has a duration of 1 year (52 weeks). The language of instruction is English. This is a single qualification (no dual award) and does not include foundation studies. The course is delivered face-to-face at the provider's campuses. Full-time study load is typically required to meet the duration. International students should note that maintaining enrolment in a full-time CRICOS-registered course is a condition of the Student visa (Subclass 500).
Tuition fees for this course are indicative at A$12,000, with non-tuition fees of A$1,250, totaling an estimated A$13,250. Please note these fees are sourced from the CRICOS register as at April 2026 and are subject to change. Always confirm current fees directly with Saveedu Pty Ltd. The following costs are NOT included in the course fees: Overseas Student Health Cover (OSHC), living expenses, and the visa application charge. For a single student, OSHC can cost approximately A$500–A$700 per year, and living costs in NSW are estimated at A$21,041 per year (indicative). For the most accurate and up-to-date fee information, visit the provider's website via HeadStart Academy.
International students typically need an English language proficiency equivalent to IELTS 5.0–5.5 overall. Prior qualifications expected for this level include completion of Year 10 or equivalent. Some providers may have additional requirements such as prerequisite knowledge or skills. Foundation or pathway options may be available if you do not meet direct entry requirements; contact Saveedu Pty Ltd for details. Remember, meeting the academic entry requirements does not guarantee a visa; you must also satisfy the Genuine Temporary Entrant (GTE) criterion and financial capacity requirements.
This course does not include a mandatory work component. However, as an international student on a Subclass 500 visa, you are permitted to work up to 48 hours per fortnight during term time and unlimited hours during scheduled course breaks. This work right is subject to visa conditions. Practical training components, if any, are part of the course curriculum and not counted as work. Always check the course structure with Saveedu Pty Ltd for any optional industry placements.
Certificate III in Cabinet Making and Timber Technology is delivered at two locations in New South Wales: 921 Punchbowl Road, Punchbowl NSW 2196 (Punchbowl campus) and Unit 26, 128 Station Rd, Seven Hills NSW 2147 (Seven Hills Workshop). Punchbowl is a suburb in Sydney's south-west, approximately 20 km from the CBD, with good public transport access via trains and buses. Seven Hills is located in Sydney's western suburbs, also well-connected by train and bus. Students studying in Sydney should budget for living costs around A$500–A$600 per week for rent, food, and transport. Both campuses are equipped with workshop facilities for hands-on training in cabinet making.
International students enrolling in this CRICOS-registered course can apply for a Student visa (Subclass 500). Key requirements include: Confirmation of Enrolment (CoE), sufficient funds for tuition, living costs, and OSHC, and meeting the Genuine Temporary Entrant (GTE) requirement. OSHC must be arranged before visa grant. Student visa holders can work 48 hours per fortnight during study periods and unlimited hours during scheduled breaks. Dependents may have work rights up to 48 hours per fortnight. Visa conditions vary, so always consult the Department of Home Affairs (homeaffairs.gov.au) or a registered migration agent (MARA). Note: HeadStart Academy is not a migration agent.
Follow these three steps to apply for Certificate III in Cabinet Making and Timber Technology at Saveedu Pty Ltd: 1. Research CRICOS-registered providers: Use HeadStart Academy to filter courses by level, field, and city. Confirm that Saveedu Pty Ltd (CRICOS 04423M) meets your criteria. 2. Apply directly to your chosen institution: Check the entry requirements (including English test scores) and application deadlines. Submit your application to Saveedu Pty Ltd with supporting documents. 3. Receive your Confirmation of Enrolment (CoE) and apply for your Student visa (Subclass 500): Once accepted, the provider will issue a CoE. Use this to lodge your visa application online, ensuring you meet all health, character, and financial requirements.
Ready to start your journey? Find out more about Certificate III in Cabinet Making and Timber Technology at Saveedu Pty Ltd through HeadStart Academy. Contact the provider directly for application details and current fees.
Certificate III in Cabinet Making and Timber Technology is a CRICOS-registered programme at Saveedu Pty Ltd. Use this register extract [CRICOS register, Apr 2026] to cross-check codes, duration and indicative fees before you apply.
This page is general information only and not migration advice. Confirm Student visa (Subclass 500) requirements with the Department of Home Affairs.