Certificate III in Automotive Electric Vehicle Technology

Certificate III in Automotive Electric Vehicle Technology (CRICOS 116639H) at MG Australia Group Pty Ltd

Certificate III in Automotive Electric Vehicle Technology (CRICOS course code 116639H) is a Certificate III delivered by MG Australia Group Pty Ltd over 2 years. This course is designed for international students seeking specialized skills in the rapidly growing electric vehicle (EV) sector. As Australia transitions to cleaner transport, qualified automotive electric vehicle technicians are in high demand. Registered on the Commonwealth Register of Institutions and Courses for Overseas Students (CRICOS), this program ensures you study with a government-approved provider. The course covers essential areas of automotive engineering, with a focus on EV systems, diagnostics, and repair. Located in Burwood, NSW, students benefit from Sydney's vibrant multicultural environment and proximity to leading automotive industry employers. At HeadStart Academy, we help you navigate CRICOS courses to find the right fit for your career goals.

All listed providers are CRICOS-registered with the Australian Government
Data sourced directly from the official CRICOS register (April 2026)
Free resource — no commission, no referral fees
Covers 26,433 courses across all study levels and states
MetricValue

What you'll study

This Certificate III (AQF Level 3) falls under the field of Automotive Engineering and Technology (030505 - Automotive Electrics and Electronics). Students gain practical and theoretical knowledge in diagnosing, servicing, and repairing electric and hybrid vehicle systems. Typical learning outcomes include understanding high-voltage safety procedures, battery management systems, electric drive motors, and regenerative braking technologies. While the exact syllabus is set by MG Australia Group Pty Ltd, this level of study prepares graduates for entry-level technician roles in the automotive EV industry. The course aligns with the national training package AUR32721, ensuring industry relevance and quality standards.

Duration and study mode

The course runs for 2 years, equivalent to 104 weeks on the CRICOS register. All instruction is delivered in English. This is a single qualification (not a dual or packaged course) at Certificate III level. Students are expected to attend classes on a full-time basis to meet student visa requirements. The study location is MG Australia's campus in Burwood, NSW, providing access to Sydney's extensive public transport network including trains and buses.

Fees (indicative — set by MG Australia Group Pty Ltd)

Tuition fees for Certificate III in Automotive Electric Vehicle Technology are A$28,000, with additional non-tuition fees of A$2,000, bringing the estimated total to A$30,000. Please note that these fees are indicative only, sourced from the CRICOS register as at April 2026 and are subject to change by the provider. Overseas Student Health Cover (OSHC), living expenses (approximately A$500–A$700 per week for rent in Sydney, plus groceries and transport), and the student visa application charge are not included in this estimate. Always confirm current fees directly with MG Australia Group Pty Ltd before applying. HeadStart Academy does not set fees and recommends checking the provider's website for the most up-to-date information.

Entry requirements (general guidance)

Prospective students typically require an IELTS overall band score of 5.0–5.5 (or equivalent) to demonstrate English proficiency. As a Certificate III program, applicants should have completed Australian Year 10 or equivalent overseas secondary schooling. Some providers may also require prior experience or aptitude in automotive or electrical fields. HeadStart Academy advises checking specific entry criteria with MG Australia Group Pty Ltd. This course does not include foundation or pathway studies, but the provider may offer alternative entry arrangements. Always verify with the institution directly.

Work component

This course has no mandatory work component. Students can still seek part-time employment during their studies, subject to student visa work conditions. For international students on a Subclass 500 visa, work is limited to 48 hours per fortnight during term and unlimited during scheduled breaks. Any work undertaken is not part of the assessed curriculum.

Delivery locations

The course is delivered at MG Australia Group Pty Ltd's campus in Burwood, New South Wales. Burwood is a lively suburb in Sydney's inner-west, approximately 12 kilometres from the city centre. The area is well-served by public transport, with Burwood Railway Station providing frequent services to Central Station and beyond. Sydney is home to over 100 CRICOS-registered providers, offering a wide range of courses across all study levels. Living costs in Sydney are among Australia's highest, with indicative weekly rent for a student sharing around A$300–A$500, groceries A$80–A$150, and a public transport weekly ticket (concession) about A$30–A$40.

Student visa

To study this course, international students must apply for a Student visa (Subclass 500). This visa allows you to stay in Australia for the duration of your studies, work part-time (48 hours per fortnight during term), and travel in and out of the country. You must meet the Genuine Temporary Entrant (GTE) requirement, demonstrate sufficient financial capacity for tuition, OSHC, and living costs, and hold valid OSHC insurance. ESOS Act protections apply, including tuition fee safeguards if your provider fails. HeadStart Academy is not a registered migration agent — for personalised advice, consult a MARA agent or visit the Department of Home Affairs website.

How to apply

Applying for Certificate III in Automotive Electric Vehicle Technology at MG Australia Group Pty Ltd is straightforward. Follow these three steps: 1. Research CRICOS-registered providers: Use HeadStart Academy to filter courses by level, field, and location. Confirm that MG Australia Group Pty Ltd (CRICOS 03639C) meets your needs. 2. Apply directly to your chosen institution: Submit your application to MG Australia, including academic transcripts, English test results (e.g., IELTS), and any required documentation. Check application deadlines and entry requirements on the provider's website. 3. Receive your Confirmation of Enrolment (CoE) and apply for your Student visa: Once accepted, you'll receive a CoE. Use this to apply for a Subclass 500 visa online through the Department of Home Affairs. Ensure you have OSHC and sufficient funds. HeadStart Academy provides guidance but recommends consulting a registered migration agent for visa lodgement.

Is Burwood, NSW right for you?

Burwood offers a blend of urban convenience and community feel, making it a popular choice for international students. The suburb has a high density of student accommodation, cafes, and shops, and is within easy reach of Sydney's CBD. With multiple train and bus connections, commuting to other parts of Sydney is straightforward. However, Sydney's cost of living is high — budget at least A$500–A$700 per week for rent and living expenses. If you prefer a quieter environment or lower costs, consider other NSW cities like Newcastle or Wollongong. For EV technology, Sydney has a growing automotive industry, with opportunities in dealerships, service centres, and EV-specific workshops. Your choice should align with your budget, lifestyle, and career goals.

Frequently Asked Questions

Start your journey in automotive EV technology today. Explore more courses on HeadStart Academy.

Other courses at MG Australia Group Pty Ltd

View the full MG Australia Group Pty Ltd profile →

Similar Certificate III courses in New South Wales

All Certificate III courses in New South Wales →

Source-backed course facts

Certificate III in Automotive Electric Vehicle Technology is a CRICOS-registered programme at MG Australia Group Pty Ltd. Use this register extract [CRICOS register, Apr 2026] to cross-check codes, duration and indicative fees before you apply.

CRICOS register extract

Course
Certificate III in Automotive Electric Vehicle Technology
CRICOS course code
116639H
Provider
MG Australia Group Pty Ltd (03639C)
Course level
Certificate III
Field of education
03 - Engineering and Related Technologies
Duration
104 weeks
Tuition (indicative)
A$28,000
Estimated total (indicative)
A$30,000
Delivery locations
BURWOOD
Work component
No

This page is general information only and not migration advice. Confirm Student visa (Subclass 500) requirements with the Department of Home Affairs.

Important notes for international students

  • Tuition and living-cost figures on this site are indicative only — confirm current fees with the provider before you accept an offer.
  • HeadStart Academy is not a registered migration agent and does not provide immigration advice. For Student visa (Subclass 500) rules, OSHC and financial capacity, verify with the Department of Home Affairs or a registered MARA agent.
  • Only CRICOS-registered providers may enrol overseas students. Always check the CRICOS course and provider codes on your offer and Confirmation of Enrolment (CoE).

Related pages

Frequently Asked Questions

The indicative total fee is A$30,000, comprising A$28,000 tuition and A$2,000 non-tuition fees. This is sourced from the CRICOS register and may change. OSHC, living costs, and visa fees are extra. Always confirm directly with MG Australia.
The course runs for 2 years (104 weeks) on a full-time basis. It is a single Certificate III qualification with no mandatory work component. Study mode is classroom-based at MG Australia's Burwood campus.
Generally, you need IELTS 5.0–5.5 overall and completion of Australian Year 10 or equivalent. Some providers may require prior automotive or electrical experience. Check with MG Australia for exact requirements.
Delivery is at MG Australia Group Pty Ltd's campus in Burwood, NSW. Burwood is a suburb of Sydney with excellent public transport. The provider is CRICOS-registered (03639C) and the course code is 116639H.
CRICOS lists estimated total fees of A$30,000 for Certificate III in Automotive Electric Vehicle Technology (tuition A$28,000). Figures are indicative as at the April 2026 register snapshot — confirm current fees with MG Australia Group Pty Ltd before applying.
The CRICOS course code is 116639H, offered by MG Australia Group Pty Ltd (provider code 03639C). Use these codes when checking your offer and CoE.