Certificate III in Solid Plastering

Certificate III in Solid Plastering (CRICOS 117664K) – Gamma Education & Training

Certificate III in Solid Plastering (CRICOS course code 117664K) is a Certificate III delivered by Gamma Education & Training Pty Ltd over 1 year. This course is designed for international students seeking hands-on skills in the building and construction industry, specifically in solid plastering techniques. As a CRICOS-registered qualification under the Australian Qualifications Framework (AQF Level 3), it meets the standards required for international student enrolment. Gamma Education & Training Pty Ltd (CRICOS 03580F) is a private provider with campuses in Brisbane, Sydney, and Melbourne. The course covers the fundamentals of plastering, including surface preparation, mixing materials, and applying finishes, preparing graduates for entry-level roles in the construction sector. Australia has over 1,500 CRICOS-registered providers offering more than 26,000 courses, and this course is one of the specialised options in the Architecture and Building field. All listed institutions are CRICOS-registered, ensuring quality and compliance with Australian education standards. Data is sourced from the official CRICOS register as at April 2026. HeadStart Academy provides this resource free of charge – no commission or referral fees.

All listed providers are CRICOS-registered with the Australian Government
Data sourced directly from the official CRICOS register (April 2026)
Free resource — no commission, no referral fees
Covers 26,433 courses across all study levels and states
MetricValue

What You'll Study

This course falls under the field of education '04 - Architecture and Building', specifically '040317 - Plastering'. At Certificate III level, students typically develop practical skills and theoretical knowledge required to work as a solid plasterer. Graduates learn to prepare surfaces, mix and apply plaster materials, create decorative finishes, and repair existing plasterwork. The curriculum aligns with the national VET code CPC31020 and covers workplace safety, reading plans, and using tools and equipment. While specific syllabus details are set by Gamma Education & Training, students can expect a combination of classroom instruction and practical workshop sessions. The course is delivered in English, and no dual qualification or foundation studies are offered. International students gain a nationally recognised qualification that can lead to employment in residential and commercial construction projects across Australia.

Duration and Study Mode

The Certificate III in Solid Plastering is a single qualification with a duration of 1 year (52 weeks) as registered on CRICOS. Instruction is in English. There is no work component included, meaning the course is purely academic and practical without a mandatory internship or work placement. Students are expected to attend classes full-time. The course is offered at multiple locations: Brisbane Campus (252 St Pauls Terrace, Fortitude Valley, QLD), Sydney City Campus (Level 3/Suite 3.09-3.11, 22-36 Mountain St, Ultimo, NSW), Melbourne City Campus (301-311 Flinders Lane, Melbourne, VIC), and an additional Sydney campus. Each campus provides access to facilities appropriate for plastering training. Brisbane has over 100 CRICOS-registered providers, Sydney over 300, and Melbourne over 200, giving students a rich study environment. Typical living costs vary: Brisbane weekly rent is around $300-$450, Sydney $400-$600, Melbourne $350-$500. These figures are indicative only. Public transport to campuses is available, with Fortitude Valley being a central hub in Brisbane.

Fees (Indicative – Set by Gamma Education & Training Pty Ltd)

Course fees are indicative and sourced from the CRICOS register. For Certificate III in Solid Plastering, the tuition fee is A$19,000. Non-tuition fees (which may include materials, administration, or other charges) are A$3,700, giving an estimated total of A$22,700. Please note that Overseas Student Health Cover (OSHC), living costs, and the student visa application charge are not included. OSHC costs approximately A$600–A$800 per year for a single student. Living costs are estimated at A$21,000–A$25,000 per year depending on city. Always confirm current fees directly with Gamma Education & Training Pty Ltd by visiting their website at https://gamma.edu.au/. HeadStart Academy does not charge referral fees; all data is provided as a free resource.

Entry Requirements (General Guidance)

Entry requirements for this course are set by Gamma Education & Training. As a general guide for international students, an IELTS overall score of 5.0–5.5 (or equivalent) is typically required. Students should have completed Australian Year 10 or equivalent overseas qualification. For Certificate III level, prior experience in building or construction is not mandatory but may be beneficial. No foundation or pathway programs are offered with this course – refer to the provider for alternative pathway options if needed. All applicants must meet the Genuine Temporary Entrant (GTE) requirement for the student visa. Remember, HeadStart Academy is not a registered migration agent; consult a MARA agent or the Department of Home Affairs for visa advice.

Work Component

This course does not include a mandatory work component. Students are not required to undertake work placement or internships as part of their studies. However, as an international student on a Subclass 500 visa, you are permitted to work up to 48 hours per fortnight during term time and unlimited hours during scheduled holidays. This allows you to gain part-time work experience in the construction or hospitality sectors, subject to visa conditions. Always check your visa conditions regarding work rights.

Delivery Locations

The Certificate III in Solid Plastering is delivered at four campuses: Brisbane Campus (252 St Pauls Terrace, Fortitude Valley, QLD), Sydney City Campus (Level 3/Suite 3.09-3.11, 22-36 Mountain St, Ultimo, NSW), Melbourne City Campus (301-311 Flinders Lane, Melbourne, VIC), and an additional Sydney City Campus (SYDNEY, NSW). Each campus is located in a major Australian city with a strong construction industry and high demand for skilled tradespeople. Students in Brisbane benefit from a lower cost of living compared to Sydney and Melbourne. Fortitude Valley is well-connected by train and bus. Sydney's Ultimo campus is near Central Station and Darling Harbour. Melbourne's Flinders Lane is in the CBD, close to public transport. When choosing a location, consider your budget, lifestyle, and job market. All campuses are CRICOS-registered addresses.

Student Visa

International students enrolled in this course require a Student visa (Subclass 500). This visa allows you to study full-time in a CRICOS-registered course. You must meet the Genuine Temporary Entrant (GTE) criterion, have sufficient financial capacity to cover tuition, living costs, and OSHC, and maintain health insurance. The current visa application charge is A$710 (subject to change). Students on this visa can work up to 48 hours per fortnight during term and unlimited hours during scheduled breaks. The ESOS Act provides legal protections, ensuring quality education and refund rights. Always check the Department of Home Affairs website for the latest requirements. HeadStart Academy does not provide migration advice – please consult a registered MARA agent.

How to Apply for Certificate III in Solid Plastering at Gamma Education & Training Pty Ltd

Applying to study this course involves three steps: 1. Research CRICOS-registered providers – Use HeadStart Academy to filter by course level (Certificate III), field (Architecture and Building), and city (Brisbane, Sydney, or Melbourne). Confirm the CRICOS code 117664K and provider 03580F. 2. Apply directly to your chosen institution – Visit Gamma Education & Training's website (https://gamma.edu.au/) to check specific entry requirements, English test scores, and application deadlines. Prepare your academic transcripts, proof of English proficiency, and passport. Submit your application online or via email. 3. Receive your Confirmation of Enrolment (CoE) and apply for your Student visa – Once accepted, you will receive a CoE. Use this to lodge your Student visa (Subclass 500) application with the Department of Home Affairs. Remember to arrange OSHC and show evidence of financial capacity. For visa assistance, consult a registered migration agent.

Ready to start your plastering career? Explore the Certificate III in Solid Plastering at Gamma Education & Training. Check the provider’s website for the latest fees and intake dates.

Other courses at Gamma Education & Training Pty Ltd

View the full Gamma Education & Training Pty Ltd profile →

Similar Certificate III courses in Queensland

All Certificate III courses in Queensland →

Source-backed course facts

Certificate III in Solid Plastering is a CRICOS-registered programme at Gamma Education & Training Pty Ltd. Use this register extract [CRICOS register, Apr 2026] to cross-check codes, duration and indicative fees before you apply.

CRICOS register extract

Course
Certificate III in Solid Plastering
CRICOS course code
117664K
Provider
Gamma Education & Training Pty Ltd (03580F)
Course level
Certificate III
Field of education
04 - Architecture and Building
Duration
52 weeks
Tuition (indicative)
A$19,000
Estimated total (indicative)
A$22,700
Delivery locations
Fortitude Valley, Ultimo, MELBOURNE, SYDNEY
Work component
No

This page is general information only and not migration advice. Confirm Student visa (Subclass 500) requirements with the Department of Home Affairs.

Important notes for international students

  • Tuition and living-cost figures on this site are indicative only — confirm current fees with the provider before you accept an offer.
  • HeadStart Academy is not a registered migration agent and does not provide immigration advice. For Student visa (Subclass 500) rules, OSHC and financial capacity, verify with the Department of Home Affairs or a registered MARA agent.
  • Only CRICOS-registered providers may enrol overseas students. Always check the CRICOS course and provider codes on your offer and Confirmation of Enrolment (CoE).

Related pages

Frequently Asked Questions

The indicative total fee is A$22,700, comprising A$19,000 tuition and A$3,700 non-tuition fees. These are sourced from the CRICOS register and are subject to change. Additional costs include OSHC (approx. A$600–A$800/year), living expenses (approx. A$21,000–A$25,000/year depending on city), and the visa application charge. Always confirm current fees with Gamma Education & Training.
The course duration is 1 year (52 weeks) as per the CRICOS register. It is a full-time single qualification, taught in English, with no work component. Students are expected to complete the program within this timeframe.
General entry requirements include an IELTS score of 5.0–5.5 overall (or equivalent) and completion of Australian Year 10 or equivalent. No prior construction experience is required, but may be advantageous. The provider may have additional criteria – check their website. International students must also meet the GTE requirement for the student visa.
This course is delivered at four campuses: Brisbane (Fortitude Valley), Sydney (Ultimo and another Sydney City campus), and Melbourne (Flinders Lane). All are CRICOS-registered locations. Choose based on your preferred city and living costs. Brisbane is more affordable, while Sydney and Melbourne offer larger student communities.
CRICOS lists estimated total fees of A$22,700 for Certificate III in Solid Plastering (tuition A$19,000). Figures are indicative as at the April 2026 register snapshot — confirm current fees with Gamma Education & Training Pty Ltd before applying.
The CRICOS course code is 117664K, offered by Gamma Education & Training Pty Ltd (provider code 03580F). Use these codes when checking your offer and CoE.