Certificate III in Instrumentation and Control (CRICOS course code 119535C) is a Certificate III delivered by NATIONAL POLYTECHNIC OF AUSTRALIA PTY LTD over 2 years. This AQF Level 3 course sits within the field of Electrical and Electronic Engineering and Technology, specifically Powerline Installation and Maintenance (031311). It provides foundational skills for working with instrumentation and control systems used in industrial settings. The course is one of over 26,000 CRICOS-registered courses available in Australia, offered by a private provider with CRICOS code 04096K. The indicative tuition fee is A$23,500, with additional non-tuition fees of A$1,500, totalling A$25,000. Students need to demonstrate English proficiency typically at IELTS 5.0-5.5 overall. The course is delivered at two locations: Quay Street in Haymarket, NSW, and South Melbourne, VIC. This page provides all the information you need to decide if this course aligns with your study goals in Australia.
Certificate III in Instrumentation and Control is a CRICOS-registered programme at NATIONAL POLYTECHNIC OF AUSTRALIA PTY LTD. Use this register extract [CRICOS register, Apr 2026] to cross-check codes, duration and indicative fees before you apply.
This page is general information only and not migration advice. Confirm Student visa (Subclass 500) requirements with the Department of Home Affairs.
Similar to a register-first directory: every claim you can act on should be checkable against an official source. Full ranking rules: methodology.
Maintained by HeadStart Academy editorial · Snapshot recalculated this build (2026-10-14).
| Field | Detail |
|---|---|
| CRICOS Course Code | 119535C |
| Provider | NATIONAL POLYTECHNIC OF AUSTRALIA PTY LTD (CRICOS 04096K) |
| Level | Certificate III (AQF Level 3) |
| Field of Education | 03 - Engineering and Related Technologies / 0313 - Electrical and Electronic Engineering / 031311 - Powerline Installation and Maintenance |
| Duration | 2 years (104 weeks) |
| VET National Code | UEE31225 |
| Indicative Tuition | A$23,500 |
| Indicative Non-Tuition | A$1,500 |
| Indicative Total | A$25,000 |
| English Requirement | IELTS 5.0-5.5 overall |
| Work Component | No |
| Delivery Locations | Haymarket (NSW), South Melbourne (VIC) |
Certificate III in Instrumentation and Control (VET national code UEE31225) is designed to equip students with the practical and theoretical skills needed to install, calibrate, maintain, and troubleshoot instrumentation and control systems. The curriculum typically covers electrical principles, process control, measurement techniques, safety practices, and communication systems. Graduates often pursue careers as instrumentation technicians or control system technicians in industries such as manufacturing, mining, and energy. As an AQF Level 3 qualification, this course provides a solid foundation for further study at diploma level or direct entry into the workforce. The field of education (Engineering and Related Technologies) ensures that students gain hands-on experience with industry-standard equipment. It is important to note that the specific syllabus is determined by National Polytechnic of Australia; prospective students should contact the provider for detailed subject lists. This qualification aligns with the Powerline Installation and Maintenance specialisation, preparing students for roles that involve maintaining electrical power distribution and control systems.
According to the CRICOS register, Certificate III in Instrumentation and Control has a duration of 2 years, equating to 104 weeks of full-time study. The language of instruction is English, and there is no dual qualification or foundation studies component. This is a single qualification that can be taken on its own. Students are expected to attend classes and complete assessments as scheduled by National Polytechnic of Australia. The course may involve a mix of classroom theory and practical workshops. International students must maintain full-time enrolment to comply with their student visa conditions. The duration allows for thorough coverage of the required competencies, including any scheduled breaks. It is advisable to check with the provider for exact term dates and any flexibility in study mode.
The indicative fees for Certificate III in Instrumentation and Control at National Polytechnic of Australia, as recorded on the CRICOS register (April 2026), are: tuition fee A$23,500 and non-tuition fees A$1,500, giving an estimated total of A$25,000. Please note that this does not include Overseas Student Health Cover (OSHC), which is mandatory for international students and typically costs around A$600–A$1,000 per year depending on the provider. Additionally, living costs are not included — indicative weekly expenses in Sydney or Melbourne are approximately: rent A$300–$500, groceries A$70–$100, transport A$30–$50. The student visa application charge (currently A$1,600 as of July 2024) is also separate. Fees are set by the institution and subject to change, so always confirm directly with National Polytechnic of Australia before applying. All CRICOS-registered providers must adhere to the ESOS Act, which protects international students' tuition fees through tuition protection measures.
General entry requirements for Certificate III in Instrumentation and Control at National Polytechnic of Australia include: a minimum IELTS score of 5.0–5.5 overall (or equivalent English proficiency test), and completion of Australian Year 12 or equivalent qualification. Some providers may require prior study in mathematics or science. If you do not meet the English requirement, you may be able to enrol in an ELICOS (English Language Intensive Course for Overseas Students) program first. Foundation or pathway options may be available — check with the provider. It is important to note that entry requirements are set by the institution and can vary; always verify with National Polytechnic of Australia directly. As this is a VET course, there are no specific prerequisite subjects listed on the CRICOS register, but having a background in electronics or engineering is beneficial.
This course does not include a mandatory work component as part of the CRICOS registration. However, international students on a Student visa (Subclass 500) are permitted to work up to 48 hours per fortnight during term time and unlimited hours during scheduled course breaks. This provides an opportunity to gain practical experience in Australia’s workforce while studying. Students are responsible for finding their own employment. It is important to balance work with study commitments to meet course requirements. The ESOS Act ensures that work does not interfere with your study obligations.
Certificate III in Instrumentation and Control is delivered at two locations by National Polytechnic of Australia: Quay Street, Haymarket, in Sydney, NSW; and South Melbourne, VIC. Haymarket is located near Sydney's Central Station, with excellent public transport links including trains, buses, and light rail. The area is surrounded by other CRICOS-registered providers — Sydney has over 500 registered providers offering thousands of courses. South Melbourne is close to Melbourne's CBD, accessible by tram and bus, and is part of a vibrant student community. Melbourne is home to more than 400 CRICOS-registered providers. Both cities have a high cost of living compared to regional areas, but offer diverse student populations and cultural experiences. When choosing a location, consider factors like climate, lifestyle, and proximity to potential employment opportunities in the engineering sector.
To study Certificate III in Instrumentation and Control in Australia, international students must apply for a Student visa (Subclass 500). This visa allows you to stay in Australia for the duration of your course, plus additional time for travel. Key requirements include: Confirmation of Enrolment (CoE) from National Polytechnic of Australia, genuine temporary entrant (GTE) evidence, sufficient financial capacity (tuition, living costs, OSHC, and dependents if applicable), and Overseas Student Health Cover (OSHC) for the entire stay. Work rights: 48 hours per fortnight during course sessions and unlimited during breaks. Dependents can also work up to 48 hours per fortnight. The ESOS Act provides protections including tuition fee refund guarantees if the provider fails to deliver. Always check the Department of Home Affairs website for the latest visa conditions and consult a registered migration agent for personalised advice.
Applying for Certificate III in Instrumentation and Control at National Polytechnic of Australia involves three simple steps:
Choosing between studying in New South Wales (Haymarket, Sydney) or Victoria (South Melbourne) depends on your personal preferences and career goals. Sydney is Australia’s largest city with a strong job market in engineering and technology, higher living costs (indicative rent A$400–$600 per week), and a subtropical climate with warm winters. Melbourne is known for its cultural diversity, slightly lower living costs (rent A$350–$500 per week), and cooler climate. Both cities have extensive public transport and large international student communities. For instrumentation and control, both states have industries in manufacturing, energy, and mining. Consider visiting each campus if possible, or contact National Polytechnic of Australia for more information on student support services. Remember that over 50% of Australia’s international students choose NSW or Victoria, so you will be part of a vibrant, multicultural environment.
Ready to start your journey? Research CRICOS-registered courses on HeadStart Academy and apply to National Polytechnic of Australia today.
View the full NATIONAL POLYTECHNIC OF AUSTRALIA PTY LTD profile →