Certificate III in Wall and Ceiling Lining

Certificate III in Wall and Ceiling Lining (CRICOS 119740J)

Certificate III in Wall and Ceiling Lining (CRICOS course code 119740J) is a Certificate III delivered by West Melbourne Institute of Technology Pty Ltd over 1 year. This qualification, with VET national code CPC31220, is designed for international students seeking specialised skills in ceiling, wall and floor fixing within the architecture and building field. As a CRICOS-registered course, it meets Australian Government standards and provides a pathway to employment in the construction industry. HeadStart Academy presents this page as a free resource to help you understand the course, costs, and visa requirements. All data is sourced from the official CRICOS register (April 2026). Please note that fees are indicative and subject to change by the provider.

All listed providers are CRICOS-registered with the Australian Government
Data sourced directly from the official CRICOS register (April 2026)
Free resource — no commission, no referral fees
Covers 26,433 courses across all study levels and states
MetricValue

Course Overview

Certificate III in Wall and Ceiling Lining (CRICOS course code 119740J) is a Certificate III (AQF Level 3) delivered by West Melbourne Institute of Technology Pty Ltd (CRICOS 03874C) over 1 year (52 weeks). This course belongs to the field of education 04 - Architecture and Building, specifically 040313 - Ceiling, Wall and Floor Fixing. It is a single qualification with no dual or foundation studies component. The language of instruction is English. West Melbourne Institute of Technology Pty Ltd is a private provider based in Melbourne, Victoria. For the most up-to-date information, visit the provider's website at www.wmit.edu.au.

What You'll Study

This course covers skills and knowledge required for fixing and finishing wall and ceiling linings in residential and commercial construction. At the Certificate III level, graduates learn to install plasterboard, fibre cement sheeting, and other lining materials, as well as apply jointing compounds and decorative finishes. The curriculum typically includes safe work practices, interpreting plans, using hand and power tools, and working as part of a construction team. While specific subjects are set by the provider, the field of education emphasises practical skills aligned with industry standards. International students should contact West Melbourne Institute of Technology for detailed syllabus information.

Duration and Study Mode

The course duration is 1 year (52 weeks) as recorded on the CRICOS register. It is delivered in English and is a single qualification (no dual award). There is no work component included. Students should expect a full-time study load. For mode of delivery (e.g., on-campus, online), please confirm with West Melbourne Institute of Technology.

Fees (Indicative)

The indicative fees for this course are as follows: - Tuition fee: A$20,000 - Non-tuition fees: A$2,750 - Estimated total cost: A$22,750 These fees are set by West Melbourne Institute of Technology Pty Ltd and are sourced from the CRICOS register. They are subject to change. Additional costs not included are Overseas Student Health Cover (OSHC), living expenses (accommodation, food, transport), and the student visa application charge. Always confirm current fees with the provider through their website: www.wmit.edu.au.

Entry Requirements (General Guidance)

International students need to meet English language and academic requirements. The indicative English requirement for this course is IELTS 5.0–5.5 overall. Prior qualifications expected at the Certificate III level typically include completion of Year 11 or equivalent. Foundation or pathway options may be available for students who do not meet direct entry requirements — contact West Melbourne Institute of Technology for details. All applicants must also satisfy the Genuine Temporary Entrant (GTE) criterion for a student visa.

Work Component

This course does not include a mandatory work component. Students may still seek part-time work while studying, subject to visa conditions.

Delivery Locations

This course is delivered at the Melbourne Campus in Melbourne, Victoria. Melbourne is a vibrant city with a large student population, excellent public transport, and a strong construction industry. The city is home to over 1,500 CRICOS-registered providers and offers a diverse multicultural environment. Living costs in Melbourne are higher than the national average; indicative weekly expenses are approximately A$450–A$600 for rent (shared accommodation), A$80–A$120 for groceries, and A$40–A$60 for public transport. These are estimates only.

Student Visa Information

International students require a Student visa (Subclass 500) to study this course. Visa holders can work up to 48 hours per fortnight during term and unlimited hours during scheduled breaks. You must maintain Overseas Student Health Cover (OSHC) for the duration of your stay. The Genuine Temporary Entrant (GTE) requirement applies, and you must demonstrate sufficient financial capacity to cover tuition, living costs, and travel. ESOS Act protections ensure your rights as an international student. For visa guidance, consult a registered migration agent (MARA) or visit the Department of Home Affairs.

How to Apply

Follow these three steps to apply for Certificate III in Wall and Ceiling Lining at West Melbourne Institute of Technology Pty Ltd: 1. Research CRICOS-registered providers: Use HeadStart Academy to filter by course level, field, and city. Confirm the provider and course are CRICOS-registered. 2. Apply directly to your chosen institution: Check entry requirements, English test scores, and application deadlines. Submit your application to West Melbourne Institute of Technology. 3. Receive your Confirmation of Enrolment (CoE) and apply for your Student visa (Subclass 500): Once you have your CoE, lodge your visa application with the Department of Home Affairs.

Ready to apply? Start by checking your eligibility and then contact West Melbourne Institute of Technology. Use HeadStart Academy to explore more courses and visa guidance.

Other courses at West Melbourne Institute of Technology Pty Ltd

View the full West Melbourne Institute of Technology Pty Ltd profile →

Similar Certificate III courses in Victoria

All Certificate III courses in Victoria →

Source-backed course facts

Certificate III in Wall and Ceiling Lining is a CRICOS-registered programme at West Melbourne Institute of Technology Pty Ltd. Use this register extract [CRICOS register, Apr 2026] to cross-check codes, duration and indicative fees before you apply.

CRICOS register extract

Course
Certificate III in Wall and Ceiling Lining
CRICOS course code
119740J
Provider
West Melbourne Institute of Technology Pty Ltd (03874C)
Course level
Certificate III
Field of education
04 - Architecture and Building
Duration
52 weeks
Tuition (indicative)
A$20,000
Estimated total (indicative)
A$22,750
Delivery locations
Melbourne
Work component
No

This page is general information only and not migration advice. Confirm Student visa (Subclass 500) requirements with the Department of Home Affairs.

Important notes for international students

  • Tuition and living-cost figures on this site are indicative only — confirm current fees with the provider before you accept an offer.
  • HeadStart Academy is not a registered migration agent and does not provide immigration advice. For Student visa (Subclass 500) rules, OSHC and financial capacity, verify with the Department of Home Affairs or a registered MARA agent.
  • Only CRICOS-registered providers may enrol overseas students. Always check the CRICOS course and provider codes on your offer and Confirmation of Enrolment (CoE).

Related pages

Frequently Asked Questions

The indicative total fee for Certificate III in Wall and Ceiling Lining is A$22,750, comprising A$20,000 tuition and A$2,750 non-tuition fees. These figures are sourced from the CRICOS register as at April 2026 and are subject to change. Additional costs include OSHC (around A$600–A$800 per year for single cover), living expenses (approximately A$22,000–A$25,000 per year in Melbourne), and the visa application charge (A$1,600 as of 2025). Always confirm with the provider at www.wmit.edu.au.
The course duration is 1 year (52 weeks) full-time, as recorded on the CRICOS register. This includes scheduled study periods and breaks. Check with West Melbourne Institute of Technology for exact term dates and any possible extensions.
General entry requirements include an IELTS score of 5.0–5.5 overall (or equivalent) and completion of Year 11 or equivalent. Some providers may accept alternative English tests. Foundation or pathway programs may be available if you do not meet direct entry. Contact the provider for precise requirements.
This course is delivered at the Melbourne Campus of West Melbourne Institute of Technology Pty Ltd in Melbourne, Victoria. Melbourne is a hub for international students, with excellent transport and a strong building industry. The campus location offers access to practical training facilities.
CRICOS lists estimated total fees of A$22,750 for Certificate III in Wall and Ceiling Lining (tuition A$20,000). Figures are indicative as at the April 2026 register snapshot — confirm current fees with West Melbourne Institute of Technology Pty Ltd before applying.
The CRICOS course code is 119740J, offered by West Melbourne Institute of Technology Pty Ltd (provider code 03874C). Use these codes when checking your offer and CoE.