Certificate III in Automotive Electrical Technology Australia

Certificate III in Automotive Electrical Technology (CRICOS 105144M)

If you're looking for a practical, hands-on pathway into the automotive industry, the Certificate III in Automotive Electrical Technology (CRICOS course code 105144M) is delivered by Swann International Pty Ltd (CRICOS 03555G) over 1 year. This Certificate III level course (AQF Level 3) focuses on the field of Automotive Engineering and Technology, specifically Automotive Electrics and Electronics. Swann International offers this course across three locations: Franklin Street and Kilkenny in Adelaide, South Australia, and Strathfield in New South Wales. The indicative tuition fee is A$15,000 with no non-tuition fees listed on the CRICOS register. Students must have an IELTS score of 5.0-5.5 overall. As a CRICOS-registered provider, Swann International meets Australian Government standards for enrolling international students, and all courses are protected under the ESOS Act. Whether you're aiming to work as an automotive electrician or progress to higher-level qualifications, this course provides the foundational skills and industry knowledge you need.

All listed providers are CRICOS-registered with the Australian Government
Data sourced directly from the official CRICOS register (April 2026)
Free resource — no commission, no referral fees
Covers 26,433 courses across all study levels and states

Course Overview

Certificate III in Automotive Electrical Technology (CRICOS course code 105144M) is a Certificate III delivered by Swann International Pty Ltd over 1 year. This vocational qualification is registered on the Australian Qualifications Framework (AQF) at Level 3 and sits within the field of Engineering and Related Technologies (03) with a specific focus on Automotive Engineering and Technology (0305) and Automotive Electrics and Electronics (030505). The VET national code for this course is AUR30320. Swann International Pty Ltd is a private CRICOS-registered provider (CRICOS code 03555G) that has been approved by the Australian Government to deliver courses to international students. The course is taught in English and leads to a single qualification—there is no dual or foundation studies component. According to the CRICOS register, this course does not include a mandatory work component, although students may seek part-time work within their visa conditions. The estimated total cost is A$15,000, which covers tuition only; additional costs such as Overseas Student Health Cover (OSHC), living expenses, and visa application fees are not included.

What You'll Study

This qualification covers the skills and knowledge required to diagnose, repair, and maintain electrical and electronic systems in light vehicles, heavy vehicles, motorcycles, or mobile plant machinery. Typical topics include: automotive electrical systems, starting and charging systems, ignition systems, body control systems, and accessory electrical systems. Students also learn about workplace health and safety, diagnostic procedures, and customer service. While HeadStart Academy does not have access to the exact syllabus, graduates at this level are generally prepared to work as automotive electrical technicians or to pursue further study in automotive engineering or management. The course content aligns with the national training package AUR30320 and is designed to meet industry standards. Practical workshops at the provider's training facilities in Adelaide and Strathfield allow students to apply theoretical knowledge in real-world settings.

Duration and Study Mode

The Certificate III in Automotive Electrical Technology is scheduled for 1 year, which equates to 52 weeks on the CRICOS register. The course is delivered in English, the primary language of instruction. As a single qualification, there is no combined or integrated program with other credentials. Students are expected to attend classes and workshops on a full-time basis. The course is structured to accommodate international students and meets the standard full-time study load required for a Student visa (Subclass 500). Swann International may offer flexible study modes, including classroom-based or blended delivery; however, specific mode details should be confirmed directly with the provider. The duration is fixed, but students must maintain satisfactory course progress to extend their visa if needed.

Fees (Indicative)

The indicative fees for Certificate III in Automotive Electrical Technology at Swann International Pty Ltd are sourced from the CRICOS register as at April 2026. Tuition is listed at A$15,000 for the entire course. Non-tuition fees are recorded as A$0, meaning no compulsory additional charges are applied at the provider level. Therefore, the estimated total is A$15,000. Please note that these figures are indicative and subject to change by the institution. Additional expenses not included in the estimate are: Overseas Student Health Cover (OSHC) – approximately A$600–A$800 per year for single cover; living costs – estimated at A$21,041 per year for a single student (Department of Home Affairs guideline); and the Student visa application charge (currently A$1,600). For the most current fee structure, always visit the official Swann International website or contact their admissions office. The ESOS Act ensures that tuition fees paid by international students are protected and must be refunded in accordance with provider policies.

Entry Requirements (General Guidance)

International students applying for this course must meet the English language proficiency requirement: an IELTS overall score of 5.0 to 5.5 (or equivalent) is typically expected. Additionally, applicants should have successfully completed Australian Year 10 or equivalent overseas qualification. Prior experience in the automotive field is not mandatory but may be beneficial. This course is at AQF Level 3, which is a certificate III level – the minimum qualification for many trade roles. If you do not meet the entry requirements, you may consider pathway or foundation programs offered by the provider or other institutions. Always verify the exact entry criteria with Swann International, as the provider may have additional prerequisites such as a minimum age (usually 18) or specific prerequisite subjects. English language test scores must be valid (usually within two years). Students who have studied in English-medium schools may be exempt. Remember that meeting the academic entry requirements does not guarantee visa approval – the Department of Home Affairs will assess your Genuine Temporary Entrant (GTE) status and financial capacity.

Work Component

This course does not include a mandatory work component according to the CRICOS register. However, student visa holders are eligible to work up to 48 hours per fortnight during academic terms and unlimited hours during scheduled course breaks, subject to visa conditions. While not required, undertaking part-time work in the automotive industry can provide valuable hands-on experience and help offset living costs. Students should ensure that any employment does not interfere with their course attendance and progress. For specific details about work-integrated learning opportunities, contact Swann International directly.

Delivery Locations

Swann International Pty Ltd delivers this course at three approved locations: - Franklin Street — Adelaide, SA (South Australia) - Kilkenny Automotive Workshop — Kilkenny, SA (Adelaide metropolitan area) - Unit 3, 53-55 Cosgrove Rd, Strathfield NSW 2136 — Strathfield, NSW (Sydney metropolitan area)

Adelaide is the capital of South Australia with a population of approximately 1.4 million. It has over 200 CRICOS-registered providers offering a wide range of courses. Living costs in Adelaide are generally lower than in Sydney – indicative weekly rent for a shared apartment is around A$200–A$300, groceries A$80–A$120, and public transport A$40–A$60. The city has a reliable public transport network with buses, trains, and trams connecting the campuses. Strathfield is a suburb in Sydney's inner-west, about 12 km from the CBD. Sydney has over 500 registered providers and higher living costs: weekly rent A$350–A$550+ for a room, groceries A$100–A$150, and transport A$50–A$70. Both locations offer access to automotive industry networks and job opportunities. Prospective students should consider location based on personal preferences and budget.

Student Visa Information

To study this course as an international student, you will need a Student visa (Subclass 500). Key requirements include: confirmation of enrolment (CoE) from Swann International, genuine temporary entrant (GTE) declaration, sufficient funds for tuition, living costs, and OSHC, and English proficiency evidence (IELTS 5.0-5.5). Work rights: 48 hours per fortnight during term, unlimited during breaks (subject to visa conditions). Dependants may have work rights as well. OSHC is mandatory for the duration of your visa. The Department of Home Affairs assesses each application on its merits. HeadStart Academy is not a registered migration agent; for expert guidance, consult a MARA-registered agent or visit homeaffairs.gov.au. ESOS Act protections apply to all CRICOS-registered courses, ensuring tuition refunds and course quality.

How to Apply for Certificate III in Automotive Electrical Technology at Swann International

Follow these three steps to enrol:

1. **Research CRICOS-registered providers** – Use HeadStart Academy or the official CRICOS website to find providers offering Certificate III in Automotive Electrical Technology. Filter by course level (Certificate III), field (Automotive Engineering), and location (SA or NSW). Compare fees, entry requirements, and campus facilities.

2. **Apply directly to your chosen institution** – Submit your application to Swann International Pty Ltd. Prepare your academic transcripts, English test results (IELTS 5.0-5.5), and proof of identity. Check the provider's application deadlines and any additional requirements. You may apply online or through an education agent.

3. **Receive your Confirmation of Enrolment (CoE) and apply for your Student visa** – Once accepted, Swann International will issue a CoE. Use this to lodge your Student visa (Subclass 500) application online through the Department of Home Affairs. Pay the visa application charge, arrange OSHC, and demonstrate genuine temporary stay and financial capacity. Processing times vary; apply early.

Studying Automotive Electrical Technology in South Australia and New South Wales

Choosing where to study is an important decision. South Australia's capital Adelaide is known for its affordability, vibrant student community, and growing automotive sector. The city is home to major automotive training facilities and is close to industrial areas where apprenticeships are common. New South Wales, particularly Sydney, offers a larger job market but higher living costs. Strathfield is conveniently located near transport links to the city and other suburbs. Both states have strong demand for qualified automotive electricians. When deciding, consider your budget, lifestyle preferences, and long-term career goals. HeadStart Academy provides data for over 26,433 courses across all states, helping you make an informed choice. Remember that all listed providers are CRICOS-registered, ensuring you receive a quality education protected by Australian law.

Ready to start your automotive career? Apply now through Swann International's website or contact their admissions team for the latest fees and intake dates.

Other courses at Swann International Pty Ltd

View the full Swann International Pty Ltd profile →

Similar Certificate III courses in South Australia

All Certificate III courses in South Australia →

Source-backed course facts

Certificate III in Automotive Electrical Technology is a CRICOS-registered programme at Swann International Pty Ltd. Use this register extract [CRICOS register, Apr 2026] to cross-check codes, duration and indicative fees before you apply.

CRICOS register extract

Course
Certificate III in Automotive Electrical Technology
CRICOS course code
105144M
Provider
Swann International Pty Ltd (03555G)
Course level
Certificate III
Field of education
03 - Engineering and Related Technologies
Duration
52 weeks
Tuition (indicative)
A$15,000
Estimated total (indicative)
A$15,000
Delivery locations
Adelaide, KILKENNY, STRATHFIELD
Work component
No

This page is general information only and not migration advice. Confirm Student visa (Subclass 500) requirements with the Department of Home Affairs.

Important notes for international students

  • Tuition and living-cost figures on this site are indicative only — confirm current fees with the provider before you accept an offer.
  • HeadStart Academy is not a registered migration agent and does not provide immigration advice. For Student visa (Subclass 500) rules, OSHC and financial capacity, verify with the Department of Home Affairs or a registered MARA agent.
  • Only CRICOS-registered providers may enrol overseas students. Always check the CRICOS course and provider codes on your offer and Confirmation of Enrolment (CoE).

Related pages

Frequently Asked Questions

The indicative tuition fee is A$15,000 for the full 1-year course. Non-tuition fees are listed as A$0, making the estimated total A$15,000. This does not include OSHC (approx. A$600–A$800), living expenses (approx. A$21,041 per year), or the visa application fee (A$1,600). Fees are subject to change – always confirm with Swann International directly.
The course duration is 1 year (52 weeks) on the CRICOS register. It is a full-time program delivered in English. There is no extended or accelerated option listed. Students must maintain satisfactory attendance and progress to meet visa conditions.
International students need an IELTS score of 5.0–5.5 overall (or equivalent). Applicants should have completed Australian Year 10 or equivalent overseas. Prior automotive experience is not required. The provider may have additional requirements – check directly. Meeting entry requirements does not guarantee visa approval.
Swann International delivers this course at three locations: Franklin Street (Adelaide, SA), Kilkenny Automotive Workshop (Kilkenny, SA), and Unit 3, 53-55 Cosgrove Rd (Strathfield, NSW). All locations are CRICOS-registered. Students can choose the campus that best suits their location preference.
CRICOS lists estimated total fees of A$15,000 for Certificate III in Automotive Electrical Technology (tuition A$15,000). Figures are indicative as at the April 2026 register snapshot — confirm current fees with Swann International Pty Ltd before applying.
The CRICOS course code is 105144M, offered by Swann International Pty Ltd (provider code 03555G). Use these codes when checking your offer and CoE.