Certificate III in Cabinet Making and Timber Technology (CRICOS course code 118526A) is a Certificate III delivered by Education Investors Pty Ltd over 1 year. This qualification sits at AQF Level 3 and falls under the field of Manufacturing Engineering and Technology (030101). It is designed to equip students with practical skills in cabinet making, timber technology, and woodworking, preparing them for roles in the furniture and joinery industries. As a CRICOS-registered course, it meets the standards required for international student enrolment under the ESOS Act. Australia is home to over 1,500 CRICOS-registered providers offering more than 26,000 courses, and this program is one of many vocational pathways for students seeking hands-on training. Whether you aim to work in residential or commercial settings, this course provides a foundation in safe work practices, material selection, and production techniques. HeadStart Academy presents this information as a free resource, with data sourced directly from the official CRICOS register (April 2026). Note that this course does not include a mandatory work component, and all fees are indicative. For visa guidance, always consult the Department of Home Affairs or a registered MARA agent.
| Metric | Value |
|---|
| Metric | Value |
|---|
| Metric | Value |
|---|
The Certificate III in Cabinet Making and Timber Technology is a vocational qualification focused on Manufacturing Engineering (field of education 030101). Students learn to interpret designs, select and prepare timber and manufactured board products, operate woodworking machines, and construct cabinets, furniture, and fitments. The curriculum covers joinery techniques, finishing processes, and quality control. While specific units are not listed here, typical learning outcomes at this level include the ability to work independently, apply safety procedures, and produce items to industry standards. This qualification aligns with the Australian VET system under national code MSF30322. Graduates may pursue roles such as cabinet maker, furniture maker, or joiner, or further study at Certificate IV level.
This course has a duration of 1 year (52 weeks) as recorded on the CRICOS register. Instruction is delivered in English. It is a single qualification (no dual award) and is not classified as foundation studies. Students should expect full-time study commitment, typically 20-25 hours per week of structured learning, plus additional self-study. The course is offered at two campuses: Mawson Lakes in South Australia and Melbourne in Victoria. Both locations provide access to workshops and equipment essential for practical training. The program is designed for international students holding a Student visa (Subclass 500), and attendance requirements must be met to maintain visa compliance.
Tuition fees for the Certificate III in Cabinet Making and Timber Technology are indicative at A$20,000 for the full program, with non-tuition fees of A$1,750, totalling an estimated A$21,750. These figures are sourced from the CRICOS register as at April 2026 and are set by Education Investors Pty Ltd. Always confirm current fees directly with the provider before applying. Additional costs not included in this estimate are: Overseas Student Health Cover (OSHC), living expenses, and the visa application charge. For context, living costs in Adelaide average around A$450–A$600 per week for rent, groceries, and transport, while Melbourne is slightly higher at A$500–A$700 per week. OSHC typically costs A$500–A$700 per year for single cover. The student visa application fee is currently A$1,600 (subject to change). HeadStart Academy recommends budgeting for these expenses.
International students need to demonstrate English language proficiency, typically IELTS 5.0–5.5 overall or equivalent. This is a general guide; check with Education Investors Pty Ltd for accepted tests and scores. Prior academic qualifications should be equivalent to Australian Year 10 or 11 completion, as this is a Certificate III level course. Mature age entry may be considered. The provider may also conduct interviews or skills assessments. There are no foundation study options listed on CRICOS for this course. If you do not meet the English requirement, consider pathway programs such as General English or ELICOS offered by the same provider or others. Always verify entry requirements directly.
This course does not include a mandatory work component. However, students on a Student visa (Subclass 500) can work up to 48 hours per fortnight during term and unlimited hours during scheduled breaks, subject to visa conditions. This provides an opportunity to gain industry experience in cabinet making or related fields while studying. It is important to balance work with study commitments to maintain satisfactory course progress.
This course is delivered at two campuses in Australia: Innovations House, 50 Mawson Lakes Blvd, Mawson Lakes SA 5095, located in the northern suburbs of Adelaide; and Melbourne Campus, Suite 2 Level 6 190 Queen St, Melbourne VIC 3000, in the central business district. Both locations are well-served by public transport. Adelaide's Mawson Lakes is a hub for education and technology, with a lower cost of living compared to other capitals. Melbourne offers a vibrant multicultural environment with extensive job opportunities in the construction and furniture industries. South Australia has over 80 CRICOS-registered providers, while Victoria has more than 300. Choosing between these locations depends on your preference for city size, climate, and lifestyle. Both campuses provide access to facilities required for practical cabinet making training.
International students enrolled in this course must hold a Student visa (Subclass 500). Key requirements include meeting the Genuine Temporary Entrant (GTE) criterion, maintaining Overseas Student Health Cover (OSHC) for the duration of your stay, and demonstrating sufficient financial capacity to cover tuition, living costs, and travel. As of 2026, the cost of living requirement is A$29,710 per year for a single student, in addition to the first year's tuition and OSHC. Student work rights allow up to 48 hours per fortnight during study periods and unlimited hours during scheduled breaks. The ESOS Act protects your rights as an international student, including tuition protection and access to complaints processes. For detailed visa advice, consult a registered migration agent (MARA) or the Department of Home Affairs at homeaffairs.gov.au. HeadStart Academy is not a migration agency and provides general guidance only.
Follow these three steps to enrol in Certificate III in Cabinet Making and Timber Technology at Education Investors Pty Ltd: 1. **Research CRICOS-registered providers**: Use the CRICOS register to verify that Education Investors Pty Ltd (CRICOS 03818M) is approved to offer this course. Filter by course level (Certificate III), field (Manufacturing Engineering), and location (SA or VIC). 2. **Apply directly to your chosen institution**: Contact Education Investors Pty Ltd for application forms, entry requirements, and deadlines. You may need to submit academic transcripts, English test results (e.g., IELTS 5.0–5.5), and a copy of your passport. The provider will assess your eligibility and issue a Letter of Offer if successful. 3. **Receive your Confirmation of Enrolment (CoE) and apply for your Student visa**: Once you accept the offer and pay any required deposits, the institution will issue a CoE. Use this to apply for a Student visa (Subclass 500) through the Department of Home Affairs. Ensure you have OSHC, sufficient funds, and meet GTE requirements.
Ready to start your journey? Learn more and apply to Education Investors Pty Ltd.
Certificate III in Cabinet Making and Timber Technology is a CRICOS-registered programme at Education Investors Pty Ltd. Use this register extract [CRICOS register, Apr 2026] to cross-check codes, duration and indicative fees before you apply.
This page is general information only and not migration advice. Confirm Student visa (Subclass 500) requirements with the Department of Home Affairs.